Paradigm Cinema 100 2.0 Datasheet - Page 7
suBwooFer Cut-oFF FrequenCy
View all Paradigm Cinema 100 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cinema 100 Cinema 200 Cinema 400 Cinema Trio # Shown: Cinema 400's Cinema Sub Design: Single driver, bass reflex, high-velocity low-turbulence resitive ports, built-in amplifier, flexible positioning: gloss side up or cloth side up with feet aMpLiFier: HigH-Current DisCrete output: 300 watts Dynamic Peak 100 watts RMS Sustained aMpLiFier Features: Auto-on; standby; soft clipping Bass Driver: 210-mm (8 in) high-excursion reinforced co-polymer polypropylene composite cone, 38-mm (1-1/2 in) voice coil Low-FrequenCy extension*: 32 Hz (DIN) suBwooFer Cut-oFF FrequenCy: Variable 35 Hz - 150 Hz; bypass option suB / sat pHase switCH: Variable 0° or 180° Line-LeveL input: Two RCA (L/R-Mono) for L/R lineout or Sub-Out/LFE-Out of receiver/processor or other line-level source Line-LeveL input iMpeDanCe: 10k ohms HeigHt, wiDtH, DeptH (gloss side up, height is with feet): 34.2 cm x 32.2 cm x 32.2 cm; 13-7/16 in x 12-11/6 in x 12-11/16 in weigHt (unpacked): 9.7 kg / 21.4 lb PRODUCT CONSUMES LESS THAN 0.5 WATTS IN STANDBY. *DIN 45 500 Indicates -3 dB in a typical listening room. †With typical program source providing the amplifiers clips no more than 10% of the time. Cinema Sub Copyright © Paradigm Electronics Inc. All rights reserved. Paradigm reserves the right to change specifications and/or features without notice as design improvements are incorporated www.paradigm.com