Paradigm Cinema 200 Manual - Page 12
WARNING, DO NOT SCREW ALL THE, WAY IN AT THIS POINT, This step is for, positioning only.
View all Paradigm Cinema 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
WALL MOUNTING (CONTINUED) VERTICAL MOUNTING FOR CINEMA™ 200, 400 & TRIO HORIZONTAL MOUNTING FOR CINEMA™ 200, 400 & TRIO Wall screws not supplied Position bracket vertically on wall as shown, then follow the steps for horizontal positioning. Step 1 NOTE: This step is for positioning only. Screws will be removed in next step to allow installation of additional anchor bolts Position bracket and ensure it is level. Mark the two center screw holes. Drill pilot holes, then press anchor bolts firmly into drywall and screw in. Follow with flathead screws: DO NOT SCREW ALL THE WAY IN AT THIS POINT-leave screw heads protruding slightly. Step 2 WARNING! For stability, all four screws MUST be used Bracket is slotted (see illustration), to allow further adjustment up or down, if necessary. Re-check to ensure bracket is level. Mark inner screw holes. 11