Paradigm Decor 1S DEcor Collection Datasheet - Page 4

Specifications Décor 1C Décor 1S Décor 1SC Décor 2S Décor 2SC Design Crossover Application High Frequency Driver Midrange / Bass Low Frequency Extension* Frequency Response (On-Axis) Frequency Response (30 Degrees Off-Axis) Sensitivity ­- Room Sensitivity ­- Anechoic Maximum Input Power‡ Impedance Suitable Amp Power Range Cabinet Baffle Grille Warranty§ 3-driver; acoustic suspension 2nd-order electroacoustic at 2.6kHz Center (Soundbar) One 1" (25mm) X-PAL™ dome, ferro-fluid damped / cooled, Perforated Phase-Aligning (PPA™) Tweeter Lens Two 4.5" (114mm) anodized aluminum unibody cones, 1.5" high-temp voice coils 80 Hz (DIN) ±3 dB from 140 - 21kHz Off-Axis: ±3 dB from 140 - 17kHz 92 dB 89 dB 70 Watts Compatible with 8 ohms 15 - 130 Watts Extruded aluminum Machined MDF ­- vinyl wrapped Machined MDF; cloth wrapped; magnetic 5 years 6-driver; acoustic suspension 2nd-order electroacoustic at 2.6kHz Stereo (Soundbar) Two 1" (25mm) X-PAL™ dome, ferro-fluid damped / cooled, Perforated Phase-Aligning (PPA™) Tweeter Lens Four 4.5" (114mm) anodized aluminum unibody cones, 1.5" high-temp voice coils 80 Hz (DIN) ±3 dB from 140 - 21kHz Off-Axis: ±3 dB from 140 - 17kHz 92 dB 89 dB 70 Watts Compatible with 8 ohms 15 - 130 Watts Extruded aluminum Machined MDF ­- vinyl wrapped Machined MDF; cloth wrapped; magnetic 5 years 9-driver; acoustic suspension 2nd-order electroacoustic at 2.6kHz Stereo + Center (Soundbar) Three 1" (25mm) X-PAL™ dome, ferro-fluid damped / cooled, Perforated Phase-Aligning (PPA™) Tweeter Lens Six 4.5" (114mm) anodized aluminum unibody cones, 1.5" high-temp voice coil 80 Hz (DIN) ±3 dB from 140 - 21kHz Off-Axis: ±3 dB from 140 - 17kHz 92 dB 89 dB 70 Watts Compatible with 8 ohms 15 - 130 Watts Extruded aluminum Machined MDF ­- vinyl wrapped Machined MDF; cloth wrapped; magnetic 5 years 6-driver; acoustic suspension 2nd-order electroacoustic at 2.6kHz Stereo (Left/Right) Two 1" (25mm) X-PAL™ dome, ferro-fluid damped / cooled, Perforated Phase-Aligning (PPA™) Tweeter Lens Four 4.5" (114mm) anodized aluminum unibody cones, 1.5" high-temp voice coils 80 Hz (DIN) ±3 dB from 140 - 21kHz Off-Axis: ±3 dB from 140 - 17kHz 92 dB 89 dB 70 Watts Compatible with 8 ohms 15 - 130 Watts Extruded aluminum Machined MDF ­- vinyl wrapped Machined MDF; cloth wrapped; magnetic 5 years 10-driver; acoustic suspension 2nd-order electroacoustic at 2.6kHz Stereo + Center (Left/Right) Four 1" (25mm) X-PAL™ dome, ferro-fluid damped / cooled, Perforated Phase-Aligning (PPA™) Tweeter Lens Six 4.5" (114mm) anodized aluminum unibody cones, 1.5" high-temp voice coils 80 Hz (DIN) ±3 dB from 140 - 21kHz Off-Axis: ±3 dB from 140 - 17kHz 92 dB† 89 dB† 70 Watts Compatible with 8 ohms 15 - 130 Watts Extruded aluminum Machined MDF ­- vinyl wrapped Machined MDF; cloth wrapped; magnetic 5 years * DIN 45 500. Indicates -3 dB in a typical listening room. † With both center channels in parallel. ‡ With typical program source provided the amplifier clips no more than 10% of the time. § Custom orders begin production immediately after payment is received or credit is granted, and are built to your submitted specifications. Product cannot be returned due to inaccurate measurements being submitted. To learn more and order, visit: Copyright © Paradigm Electronics Inc. All rights reserved. We reserve the right to change specifications and/or features without notice as design improvements are incorporated. www.paradigm.com. 05-24-18 design.paradigm.com