Paradigm Defiance WT Defiance Wt Wireless System Owners Manual - Page 4

CONNECTION Connecting the Wireless Receiver Wireless Module Connection Wireless Module Connection To install the Defiance WT wireless receiver, slide it into the Wireless Module Connection port on the back of the subwoofer. See Fig.1a and Fig. 1b. Connecting the Wireless Transmitter Connection to the Defiance WT Wireless transmitter can be made in either of two ways: 1. Line-Level Input From Sub/LFE Output Fig. 1a Defiance WT wireless module receptacle, located on subwoofer. Follow the instructions for this connection option in the following section of the Defiance Subwoofer Owners Manual: "Connecting the Defiance WT Wireless Transmitter". 2. Line-Level Input From Pre-Out/Front-Out Without High-Pass Output from Sub Follow the instructions for this connection option in the following section of the Defiance Subwoofer Owners Manual: "Connecting the Defiance WT Wireless Transmitter". Fig. 1b Defiance WT wireless receiver installation. TRANSMITTER/ RECEIVER SYNC This Defiance WT Wireless System is shipped already paired. To re-sync the wireless system: 1. Verify the subwoofer is powered on and that the subwoofer's status light is red or white. 2. If this Wireless Transmitter's power cord is plugged in, unplug it for 10 seconds. 3. Plug in the Wireless Transmitter's power cord. 4. Plug the Wireless Receiver into the "Wireless Module Connection" input on the back of the subwoofer (see diagram above). 5. Wait until the status lights start flashing on both the Wireless Receiver and the Wireless Transmitter. 6. Push the Wireless Receiver's sync button for 5 seconds. 7. Push and hold the Wireless Transmitter's sync button until the Wireless Receiver's status light turns solid. 3