Paradigm Defiance X15 Defiance X Manual - Page 23

7. Line Level Input (Left/Right) The Line Level Input can be used as a subwoofer connection to the Main-Out or Pre-Out on a receiver/preamplifier. NOTE: The setting of the Low Pass Filter control is applied to the signal received through these inputs. 8. Line Level Input (LFE) The Line Level LFE Input can be used as a subwoofer connection to to the LFE Out/Sub-Out on a receiver/preamplifier. NOTE: The Low Pass Filter should be set to Bypass. LFE signals are controlled from your receiver/preamplifier. By default, the Low Pass Filter is set to Bypass. 9. Balanced XLR (LFE) (X15 only) The Balanced XLR LFE Input can be used as a subwoofer connection to the LFE Out/Sub-Out on a receiver/preamplifier. 10. Speaker Level Inputs (Left/Right) The Speaker Level Inputs allows standard speaker cable be used for the subwoofer connection. To use these connections the speaker cable should be terminated using banana style plugs. NOTE: The setting of the Low Pass Filter control is applied to the signal received through these inputs. 11. Defiance WT Wireless Module Input (Sold Separately) The Defiance WT Wireless Module allows for wireless subwoofer integration. NOTE: The Wireless Module must be paired with its matching transmitter - See the Paradigm Defiance WT Manual. 12. AC Power Connection WARNING! The power cord should not be installed, removed, or left detached from the subwoofer while the other end is connected to an AC power source. The IEC power cord should be firmly inserted into the AC power receptacle on the rear panel of the subwoofer. Then to any convenient AC wall outlet. NOTE: The sub also integrates a signal sensing power supply that automatically switches off after sensing no music signal for several minutes (this will only occur when the power switch is set to 'Auto'). paradigm.com 20