Paradigm Founder 90C Founder Series Owners Manual - Page 25

Basic Troubleshooting

Page 25 highlights

To Fine tune the subwoofer, please refer to the Owner's Manual that was included with your subwoofer. BASIC TROUBLESHOOTING Warning: Do not open the product. Under no circumstances should the product be repaired by anyone other than an authorized Paradigm Dealer, as this will invalidate the warranty. Please contact Paradigm Customer Support for more information. If a problem occurs, you can try the troubleshooting suggestions listed below. If one of these doesn't remedy the problem, or you are not sure how to proceed, please contact the Paradigm Customer Support team and we will be happy to help. Customer Support • Visit our website at paradigm.com/support • Email us at [email protected] PROBLEM No Sound SOLUTION • Make sure receiver, preamp or amplifier is plugged in and turned on. • Check power outlet at the wall is working. • Are headphones plugged in, or is the system on Mute? • Re-check all connections. No Sound from One • Check your balance control. or More Speakers • Check that all power cords are properly plugged in and functioning. Lack of Bass or Dislocated Image • One or more speakers may be connected out of phase (their polarity is reversed). • Re-check to ensure that each speaker's cable is connected with correct polarity: red (+) to red (+) and black (-) to black (-). 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

23
To Fine tune the subwoofer, please refer to the Owner’s Manual that was included with
your subwoofer.
BASIC TROUBLESHOOTING
If a problem occurs, you can try the troubleshooting suggestions listed below. If one of
these doesn’t remedy the problem, or you are not sure how to proceed, please contact
the Paradigm Customer Support team and we will be happy to help.
Customer Support
• Visit our website at
paradigm.com/support
• Email us at
SOLUTION
PROBLEM
No Sound from One
or More Speakers
No Sound
Lack of Bass or
Dislocated Image
• Make sure receiver, preamp or amplifier is plugged in and turned on.
• Check power outlet at the wall is working.
• Are headphones plugged in, or is the system on Mute?
• Re-check all connections.
• Check your balance control.
• Check that all power cords are properly plugged in and functioning.
• One or more speakers may be connected out of phase
(their polarity is reversed).
• Re-check to ensure that each speaker’s cable is connected with
correct polarity: red (+) to red (+) and black (-) to black (-).
Warning: Do not open the product. Under no circumstances should
the product be repaired by anyone other than an authorized Paradigm
Dealer, as this will invalidate the warranty. Please contact Paradigm
Customer Support for more information.