Paradigm GO10SW Garden Oasis Datasheet - Page 6

Audio Settings Chart

Page 6 highlights

Audio Settings Chart INSTALLATION USING LONG WIRES (100 feet or longer) CHANNEL #1 CHANNEL #2 ON AMP ON AMP PRESETS ON CROWN AMP Wire Product to Channel #1 on the Crown Amplifier Wire Product to Channel #2 on the Crown Amplifier Select the Preset number on the Crown Amplifier specified below GO10SW GO4 Preset 2 for GO10SW and GO4 GO10SW or GO12SW plus GO4 or GO6 satellite speakers GO10SW GO12SW GO6 GO4 Preset 3 for GO10SW and GO6 Preset 4 for GO12SW and GO4 GO12SW GO6 Preset 5 for GO12SW and GO6 PRESET NAME GO4_10SW GO6_10SW GO4_12SW GO6_12SW POWER OUTPUT SET DIAL ON SATELLITE SPEAKER Signal level provided to subwoofer / speakers Remove the cap from the rear of the satellite speaker and position the dial to the wattage setting listed below 8 ohm / 70V hybrid Speakers: 1-4 or 5-12 30W (or less) 8 ohm / 70V hybrid Speakers: 13-24 15W (or less) 8 ohm / 70V hybrid Speakers: 25-50 7.5W (or less) 8 ohm / 70V hybrid Speakers: 50-100 3.8W (or less) NO subwoofer and GO4 or GO6 satellite speakers GO4 GO6 GO4 GO6 GO4 GO6 GO4 GO6 Preset 10 for GO4 in Mono Preset 11 for G06 in Mono Preset 12 for GO4 in Stereo Per-set 13 for GO6 in Stereo GO_4_MO GO_6_MO GO_4_ST GO_6_ST NA / 70V NA / 70V Speakers: 1-4 or 5-12 30W (or less) Speakers: 13-24 15W (or less) NA / 70V Speakers: 25-50 7.5W (or less) NA / 70V Speakers: 50-100 3.8W (or less) INSTALLATION USING SHORT WIRES (less than 100 feet) FOR 4 OR FEWER SPEAKERS CHANNEL #1 CHANNEL #2 ON AMP ON AMP PRESETS ON CROWN AMP PRESET NAME POWER OUTPUT SET DIAL ON SATELLITE SPEAKER Wire Product to Channel #1 on the Crown Amplifier Wire Product to Channel #2 on the Crown Amplifier Select the Preset number on the Crown Amplifier specified below Signal level provided to subwoofer / speakers Remove the cap from the rear of the satellite speaker and position the dial to the wattage setting listed below GO10SW or GO12SW plus 4 or fewer GO4 or GO6 satellite speakers GO10SW GO10SW GO12SW GO12SW GO4 GO6 GO4 GO6 Preset 6 for GO10SW and GO4 Preset 7 for GO10SW and GO 6 Preset 8 for GO12SW and GO4 Preset 9 for GO12SW and GO6 8GO4_10SW 8GO6_10SW 8GO4_12SW 8GO6_12SW 8 ohm / 8ohm 8 ohm / 8ohm 8 ohm / 8ohm 8 ohm / 8ohm 8ohms No Subwoofer and 4 or fewer GO4 or GO6 satellite speakers GO4 GO6 GO4 GO6 GO4 GO6 GO4 GO6 Preset 14 for GO4 in mono Preset 15 for GO6 in mono Preset 16 for GO4 in stereo Preset 17 for GO6 in stereo 8GO_4_MO 8GO_6_MO 8GO_4_ST 8GO_6_ST NA / 8ohm NA / 8ohm NA / 8ohm NA / 8ohm 8ohms rev. 121916 ppaarardaidgimg.mco.cmom

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

paradigm.com
INSTALLATION USING LONG WIRES (100 feet or longer)
CHANNEL #1
ON AMP
CHANNEL #2
ON AMP
PRESETS ON
CROWN AMP
PRESET
NAME
POWER
OUTPUT
SET DIAL ON SATELLITE
SPEAKER
Wire Product
to Channel #1
on the Crown
Amplifier
Wire Product
to Channel #2
on the Crown
Amplifier
Select the Preset
number on the
Crown Amplifier
specified below
Signal level
provided to
subwoofer /
speakers
Remove the cap from the
rear of the satellite speaker
and position the dial to the
wattage setting listed below
GO10SW or GO12SW
plus GO4 or GO6
satellite speakers
GO10SW
GO4
Preset 2 for
GO10SW and GO4
GO4_10SW
8 ohm / 70V
hybrid
Speakers:
1–4 or 5–12
30W (or less)
GO10SW
GO6
Preset 3 for
GO10SW and GO6
GO6_10SW
8 ohm / 70V
hybrid
Speakers: 13–24
15W (or less)
GO12SW
GO4
Preset 4 for
GO12SW and GO4
GO4_12SW
8 ohm / 70V
hybrid
Speakers: 25–50
7.5W (or less)
GO12SW
GO6
Preset 5 for
GO12SW and GO6
GO6_12SW
8 ohm / 70V
hybrid
Speakers: 50–100
3.8W (or less)
NO subwoofer and
GO4 or GO6 satellite
speakers
GO4
GO4
Preset 10 for
GO4 in Mono
GO_4_MO
NA / 70V
Speakers:
1–4 or 5–12
30W (or less)
GO6
GO6
Preset 11 for
G06 in Mono
GO_6_MO
NA / 70V
Speakers: 13–24
15W (or less)
GO4
GO4
Preset 12 for
GO4 in Stereo
GO_4_ST
NA / 70V
Speakers: 25–50
7.5W (or less)
GO6
GO6
Per-set 13 for
GO6 in Stereo
GO_6_ST
NA / 70V
Speakers: 50–100
3.8W (or less)
INSTALLATION USING SHORT WIRES (less than 100 feet) FOR 4 OR FEWER SPEAKERS
CHANNEL #1
ON AMP
CHANNEL #2
ON AMP
PRESETS ON
CROWN AMP
PRESET
NAME
POWER
OUTPUT
SET DIAL ON SATELLITE
SPEAKER
Wire Product
to Channel #1
on the Crown
Amplifier
Wire Product
to Channel #2
on the Crown
Amplifier
Select the Preset
number on the
Crown Amplifier
specified below
Signal level
provided to
subwoofer /
speakers
Remove the cap from the
rear of the satellite speaker
and position the dial to the
wattage setting listed below
GO10SW or GO12SW
plus 4 or fewer
GO4 or GO6 satellite
speakers
GO10SW
GO4
Preset 6 for
GO10SW and GO4
8GO4_10SW
8 ohm / 8ohm
8ohms
GO10SW
GO6
Preset 7 for
GO10SW and GO 6
8GO6_10SW
8 ohm / 8ohm
GO12SW
GO4
Preset 8 for
GO12SW and GO4
8GO4_12SW
8 ohm / 8ohm
GO12SW
GO6
Preset 9 for
GO12SW and GO6
8GO6_12SW
8 ohm / 8ohm
No Subwoofer and
4 or fewer GO4
or GO6 satellite
speakers
GO4
GO4
Preset 14 for
GO4 in mono
8GO_4_MO
NA / 8ohm
8ohms
GO6
GO6
Preset 15 for
GO6 in mono
8GO_6_MO
NA / 8ohm
GO4
GO4
Preset 16 for
GO4 in stereo
8GO_4_ST
NA / 8ohm
GO6
GO6
Preset 17 for
GO6 in stereo
8GO_6_ST
NA / 8ohm
Audio Settings Chart
rev. 121916