Paradigm MilleniaOne CT Set-up Guide - Page 2

BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL. 1 Wire Speakers Press down on binding post to allow wire access. Left cable to left speaker. 4 Right cable to right speaker. 2 Attach Speakers to Stands DO NOT pinch wires when attaching speakers to stands NOTE: Pre-attached wall mounting brackets must be removed in order to attach stands (+) to (+), (-) to (-) Tighten knob to secure stand 3 Connect Subwoofer 4 5 4 1 Connect controller cable to subwoofer and to control box 4 5 4 1 Connect power cable to subwoofer and to wall outlet OPTIONAL: A On Stands: Adjust angle of tilt, if desired B Wall-Mounting Paradigm DOES NOT supply hardware for mounting brackets to the wall. Use 2 #8 1-1/2" wood screws to mount the wall bracket to the wall. Mount bracket to wood stud or use anchor bolts rated for 20 lb weight. Adjust On-Wall Angle of Tilt, if desired Top View 4 Connect Control Box NOTE: Choose analog OR digital connections TIP: If after set-up and "power on" you do not hear audio, press the "input" button on the remote. Analog connection to TV (use for good audio) Digital connection to TV (use for best audio) 3 52 C Adjust Subwoofer Loundness Your subwoofer's LEVEL switch is set to 12 o'clock to suit average preferences. If desired, adjust up or down to match sound level of your speakers. GAIN - BASS + BASS D To Use Control Box with Apple TV Connect digital output cable Squeeze here (both sides) to allow bracket to slide snugly Tighten knob before sliding into bracket Side View For further instructions, refer to your Apple TV Set-Up Guide.