Paradigm SIG-LCR 5 v.3 Datasheet - Page 7
SIG-LCR 5, SIG-1.5R, SIG-1.5R-30, SIG-ADP, VC-150
View all Paradigm SIG-LCR 5 v.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Signature Series SIG-1.5R SIG-1.5R-30 | GUIDED SOUNDFIELD™ SYSTEM SIG-ADP Design 2-driver, 2-way in-ceiling/in-wall, GRIP™ chassis/mounting bracket 2-driver, 2-way in-ceiling, drivers mounted at 30° relative to mounting surface, Ultra-Rigid™ die-cast chassis with GRIP™ mounting bracket 7-driver, 3-way in-wall/in-ceiling surround/rear, Ultra-Rigid™ die-cast chassis/mounting bracket (optimized reverberant soundfield) Crossover(s) 3rd-order electro-acoustic at 2.5 kHz 3rd-order electro-acoustic at 2.5 kHz 3rd-order electro-acoustic at 2.5 kHz, 2nd-order electro-acoustic at 550 Hz High-Frequency Driver(s) 25-mm (1 in) P-Be™ dome, rear damping chamber 25-mm (1 in) P-Be™ dome, rear damping chamber Two 25-mm (1 in) P-Be™ domes, rear damping with ARB™ fins and integrated heatsink, dual super- with ARB™ fins and integrated heatsink, dual super- chamber with ARB™ fins and integrated heatsink, dual neodymium magnets, die-cast heatsink chassis neodymium magnets, die-cast heatsink chassis super-neodymium magnets, die-cast heatsink chassis Midrange Driver(s) Bass/Midrange Driver Bass Driver Low-Frequency Extension* Frequency Response: On-Axis 30˚ Off-Axis n/a n/a Four 29-mm (1-1/8 in) x 102-mm (4 in) Co-PAL™ cones, 14-mm (9/16 in) four-layer voice coils, dual super-neodymium magnets, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™ 210-mm (8 in) Co-PAL™ cone, anodized solid- 210-mm (8 in) Co-PAL™ cone, anodized solid- n/a aluminum phase plug, 38-mm (1-1/2 in) dual-layer aluminum phase plug, 38-mm (1-1/2 in) dual-layer voice coil, ceramic/ferrite magnets, AVS™ die-cast voice coil, ceramic/ferrite magnets, AVS™ die-cast heatsink chassis heatsink chassis n/a n/a 210-mm (8 in) mineral-filled polypropylene cone, 38-mm (1-1/2 in) four-layer voice coil, massive ceramic/ferrite magnet, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™ 37 Hz (DIN) 37 Hz (DIN) 38 Hz (DIN) ±2 dB from 58 Hz - 45 kHz ±2 dB from 58 Hz - 20 kHz ±2 dB from 58 Hz - 45 kHz ±2 dB from 58 Hz - 17 kHz ±2 dB from 48 Hz - 45 kHz (reverberant soundfield) Sensitivity - Room/Anechoic 92 dB / 88 dB 92 dB / 88 dB 90 dB / 86 dB Suitable Amplifier Power Range 15 - 225 watts 15 - 225 watts 15 - 180 watts Maximum Input Power† 140 watts 140 watts 120 watts Impedance Compatible with 8 ohms Compatible with 8 ohms Compatible with 8 ohms External Dimensions: (D or H x W) 22.6 cm / 8-15/16 in 29.6 cm / 11-10/16 in 51.0 cm x 23.1 cm / 20-1/16 in x 9-1/16 in Minimum Mounting Depth** 10.0 cm / 3-15/16 in 13.9 cm / 5-1/2 in 7.6 cm / 3 in Cutout Dimensions: (D or H x W) 20.0 cm / 7-14/16 in 27.0 cm / 10-10/16 in 48.6 cm x 20.7 cm / 19-2/16 in x 8-3/16 in Minimum Internal Volume Required 20 L / 0.70 cu ft 20 L / 0.70 cu ft 20 L / 0.70 cu ft Weight (unpacked) 1.6 kg / 3.5 lb each 2.0 kg / 4.4 lb each 5.6 kg / 12.3 lb each Finish White, paintable White, paintable White, paintable Pre-Construction Bracket (sold sep.) PB-8R; retrofit included PB-10R; retrofit included PB-8x19; retrofit included * DIN 45 500. Indicates -3 dB in a typical listening room. † With typical program source, provided the amplifier clips no more than 10% of the time. ** Depth required is the distance between 1/2˝ drywall, or similar material. SIG-LCR 5 Design 6-driver, 3-1/2-way integrated in-wall left/center/right system, critical bracing and volume supplied by required Paradigm® BX-LCR 5 backbox (sold sep.) Crossovers 3rd-order electro-acoustic at 2.5 kHz, 2nd-order electro-acoustic at 500 Hz, 2nd-order electro-acoustic at 350 Hz (outer bass drivers) High-Frequency Driver 25-mm (1 in) P-Be™ dome, rear damping chamber with ARB™ fins and integrated heatsink, dual super-neodymium magnets, die-cast heatsink chassis, IMS/SHOCK-MOUNT™ Midrange Driver 115-mm (4-1/2 in) Co-PAL™ cone, anodized solid-aluminum phase plug, 25-mm (1 in) dual-layer voice coil, dual super-neodymium magnets, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™ Bass/Midrange Drivers Two 178-mm (7 in) Co-PAL™ cones, anodized solid-aluminum phase plugs, 38-mm (1-1/2 in) dual-layer voice coils, ceramic/ferrite magnets, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™ Bass Drivers Two 178-mm (7 in) mineral-filled polypropylene cones, 38-mm (1-1/2 in) four-layer voice coils, massive ceramic/ferrite magnets, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™ Low-Frequency Extension* 38 Hz (DIN) Frequency Response: On-Axis ±2 dB from 58 Hz - 45 kHz 30˚ Off-Axis ±2 dB from 58 Hz - 20 kHz Sensitivity - Room/Anechoic 94 dB / 90 dB Suitable Amplifier Power Range 15 - 500 watts Maximum Input Power† 250 watts Impedance Compatible with 8 ohms Outer Dimensions of Speaker Frame: (H x W) 92.5 cm x 23.0 cm 36-6/16 in x 9-2/16 in Weight (unpacked) Speaker: 10.4 kg / 23 lb each; Backbox: 19.0 kg / 42 lb each Finish White, paintable Required Backbox (sold sep.) BX-LCR 5 VC-150 Paradigm® VC-150 High-End Volume Control Vastly superior signal delivery with exceptionally flat frequency response and ultra-low distortion. • Stereo design • Impedance matching (safe operation with any amplifier) • Connects up to 16 pairs of speakers to one amplifier • Suitable for amplifiers up to 150 watts • Total attenuation of -52 dB • Frequency response: 20 Hz - 20 kHz, +1/ -0.5 dB • Accommodates up to 14-gauge wire • Easy-connect™ locking speaker terminal block • Noise-free operation (12 volume positions including off) • Fits into a single gang junction box with 2-9/16 inch depth (or more) • Removable plastic decora insert with integrated knob • Splined shaft allowing the knob to be positioned as required • 10-year limited warranty