Paradigm Signature SUB 2 Datasheet - Page 7

SUB 1 Design Hexagonal cabinet with multiple high-excursion drivers radially aligned in a Vibration-Canceling Design Architecture, patented built-in Ultra-Class-D™ power amplifier, sealed enclosure, PBK interface, removable grille SUB 2 Design Hexagonal cabinet with multiple high-excursion drivers radially aligned in a Vibration-Canceling Design Architecture, patented built-in Ultra-Class-D™ power amplifier with Power Factor Correction, sealed enclosure, PBK interface NOTE: Due to the incredibly high power and tremendous output the SUB 2's grilles are non-removable Universal Input Power SUB 2's Universal Input Power feature allows the subwoofer to operate connected to any line voltage between 108 volts and 265 volts. In order to achieve maximum output, connect to a 240-volt line. (See Dealer for additional information.) SUB 1 SUB 2 Amplifier High-Current Discrete-Output, 3,400 watts Dynamic Peak / 1,700 watts RMS Sustained Amplifier Features Auto-on / off, Trigger-on / off, soft clipping, electrical shorting protection, thermal protection Bass Drivers Six 203-mm (8 in) mineral-filled co-polymer polypropylene cones, overmolded FEA-optimized NLC™ surrounds, 38-mm (1-1/2 in) four-layer long-excursion voice coils, high-temperature composite Nomex® formers, advanced spiders, 9.2-lb (4.16 kg) hard ferrite magnet / motor structure, AVS™ die-cast heatsink chassis Low-Frequency Extension* 12 Hz (DIN) Subwoofer Cut-Off Frequency Variable 35 Hz - 150 Hz, Bypass Option Sub / Sat Phase Alignment Variable 0˚ - 180˚ Line-Level Input RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp / processor or other line-level source Line-Level Input Sensitivity 100 mV mono Line-Level Input Impedance RCA: 10k ohms, XLR: 20k ohms Accessory Included Paradigm Perfect Bass Kit Height, Width, Depth†† 51.6 cm x 50.5 cm x 45.5 cm 20-1/4 in x 19-7/8 in x 17-7/8 in Diameter of Hexagonal Cabinet 50.5 cm / 19-7/8 in Weight (unpacked) 49.4 kg / 109 lb each Finishes Cherry, Piano Black Amplifier** High-Current Discrete-Output, 9,000 watts Dynamic Peak / 4,500 watts RMS Sustained Amplifier Features Auto-on / off, Trigger-on / off, soft clipping, electrical shorting protection, thermal protection Bass Drivers Six 254-mm (10 in) RCR™ mineral-filled co-polymer polypropylene cones, FEA-optimized overmolded thermoplastic foam surrounds, 76-mm (3 in) ten-layer long-excursion voice coils, high-temperature composite Nomex® formers, dual advanced spiders, 25.2-lb (10.5 kg) hard ferrite magnet / motor structure, massive center heatsink and oversize pole piece, AVS™ die-cast heatsink chassis Low-Frequency Extension* 7 Hz (DIN) Subwoofer Cut-Off Frequency Variable 35 Hz - 150 Hz, Bypass Option Sub / Sat Phase Alignment Variable 0˚ - 180˚ Line-Level Input RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp / processor or other line-level source Line-Level Input Sensitivity 100 mV mono Line-Level Input Impedance RCA: 10k ohms, XLR: 20k ohms AC Voltage (See note on Universal Input Power below left) 120v (at 3,000 watts) - 50/60 Hz 240v (at 4,500 watts) - 50/60 Hz Accessory Included Paradigm Perfect Bass Kit Height, Width, Depth†† 62.2 cm x 60.4 cm x 57.8 cm 24-1/2 in x 23-3/4 in x 22-3/8 in Diameter of Hexagonal Cabinet 60.4 cm / 23-3/4 in Weight (unpacked) 106 kg / 230 lb each Finishes Cherry, Piano Black *DIN 45 500. Indicates -3 dB in a typical listening room. **Connected to a 240-volt outlet. †Listed width excludes feet. ††Dimensions include grilles and feet.