Pentair Kreepy Krauly Kruiser Manual - English - Page 9

5 Connection to Pool With Two Skimmers 1. Select one skimmer for the Kruiser™ Inground Suction Pool Cleaner. 2. Close off the other skimmer with the pump valve. 3. Connect the end of submerged hose into the selected skimmer. 4. Refer to the "Pool with One Skimmer" instructions on the previous page, starting from step 3. Pump Valve Optional Vacuum Line Installation Install the adjustable regulator valve in the skimmer if attaching cleaner to a dedicated vacuum line. Note: Be sure that your Dedicated Suction Port is fitted with a Safety Vac-Lock Fitting. If not, install the one that is provided with your cleaner. 1. Turn the pool pump off. 2. Close the main drain and all suction lines, except the skimmer and the vacuum line that will connect to the cleaner. 3. Thread the vac-lock wall fitting into the end of the dedicated suction line. Note: Use two wraps of thread seal tape around the threads to ensure easy removal. 4. Place the cleaner (with the hose and hose weights) into the pool and allow it to sink to the floor. 5. Continue to feed hose vertically down into the pool until completely filled with water and purged of air. 6. Insert the hose end of the last hose section into the vac-lock wall fitting. Safety Vac-Lock Dedicated Suction Port Safety Vac-Lock (provided) KREEPY KRAULY® KRUISER™ Inground Suction Pool Cleaner Installation and User's Guide