Pentair Pelican Water Softener Alternative and Filter Combo System Pro UV Peli - Page 6

Page 6 highlights

OUT OUTLET INLET IN MEDIA SOAK Wall Incoming Water Supply Top View Sediment Filter Bypass Mode Wall Outgoing Water to House Water Softener Alternative Caution NaturSoft® - Media Soak: The Natursoft Water Softener Alternative MUST be in the bypass position during this process (see Figure 9). 1. Open a cold water faucet or test spigot close to the downstream of the Water Softener alternative. 2. Turn the water back on at the main shut-off valve allowing the system to fill with water. The air being displaced will escape through the open fixture downstream. 3. Turn the arrows on the Bypass Valve of the NaturSoft® Tank into the Bypass Mode position to bypass the tank. This will allow you to isolate the system and restore water supply to the home/ building during the NaturSoft® media soak. 4. Allow the tank to soak for at least 60 minutes. Caution NaturSoft® - Media Flush: The Natursoft Water Softener Alternative MUST be in the bypass position during this process (see Figure 9). 1. After the tank has soaked for 60 minutes, turn the main water supply back on or turn the arrows on the Bypass Valve back into their original position. 2. Flush the system by running water for 5 minutes at a high flow rate of 5 GPM (this can be achieved by using a bath tub or more than three (3) faucets). Note: The flush water may have a milky look to it. This is normal as calcium carbonate fines are flushed from the system. 3. Rinse the system by reducing the flow rate to ½ GPM and run water for 60 minutes (this can be achieved by turning one faucet ¼ of the way on). 4. Turn the Whole House Water Filter Bypass Valve to the on position (out of Bypass Mode). 6 • WATER SOFTENER ALTERNATIVE WITH NATURSOFT® SALT-FREE TECHNOLOGY

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
MEDIA SOAK
IN
OUT
Outgoing
Water to
House
Sediment Filter
Bypass Mode
Incoming
Water
Supply
r
e
n
e
t
f
o
S
r
e
t
a
W
Alternative
Wall
Wall
INLET
OUTLET
Top View
NaturSoft® - Media Soak:
The
Natursoft Water Softener Alternative
MUST be in the bypass position during this process (see Figure 9).
1. Open a cold water faucet or test spigot close to the downstream of the Water Softener alternative.
2. Turn the water back on at the main shut-off valve allowing the system to fill with water. The air being displaced will escape
through the open fixture downstream.
3. Turn the arrows on the Bypass Valve of the NaturSoft® Tank into the Bypass Mode position to bypass the tank. This will
allow you to isolate the system and restore water supply to the home/ building during the NaturSoft® media soak.
4. Allow the tank to soak for at least 60 minutes.
Caution
NaturSoft® - Media Flush:
The Natursoft Water Softener Alternative MUST be in the bypass position during this process (see Figure 9).
1. After the tank has soaked for 60 minutes, turn the main water supply back on or turn the arrows on the Bypass Valve
back into their original position.
2. Flush the system by running water for 5 minutes at a high flow rate of 5 GPM (this can be achieved by using a bath tub or
more than three (3) faucets).
Note:
The flush water may have a milky look to it. This is normal as calcium carbonate fines are flushed from the system.
3. Rinse the system by reducing the flow rate to ½ GPM and run water for 60 minutes (this can be achieved by turning one
faucet ¼ of the way on).
4. Turn the Whole House Water Filter Bypass Valve to the on position (out of Bypass Mode).
Caution
6 •
WATER SOFTENER ALTERNATIVE WITH NATURSOFT® SALT-FREE TECHNOLOGY