Pentair Pentair Hydromatic SHEF50S/SHEF100S Series Effluent Pumps Hydromatic S - Page 1

DATASHEET SUBMERSIBLE HIGH HEAD EFFLUENT SHEF50S/SHEF100S SERIES The SHEF50S and SHEF100S series effluent pumps are designed specifically for effluent pressure distribution mounds, trenches, and high-flow drainage applications. Heavy duty construction with finest corrosion-resistant materials for years of extended service in the harshest environments. APPLICATIONS Effluent removal, sump drainage, water transfer, flood control. FEATURES  Cast Iron Tough: All cast-iron housing and volute case resists the most extreme corrosive environments.  High-Efficiency Dosing: Engineered thermoplastic or bronze (optional) two-vane impeller provides ideal performance for efficient dosing.  Jam-Proof: Enclosed impeller design eliminates jamming between impeller and volute.  Powerful Torque: High-torque, permanent split capacitor (PSC) motor; no starting switches or relays to wear out.  Runs Cooler: Rugged, oil-filled motor for bearing lubrication and maximum heat dissipation.  Thermal Protection: Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature (single phase only). SPECIFICATIONS  Capacities: Max Flow is 112 GPM (423.9 LPM)  Shut-Off Head: Max shutoff is 85' (25.9 m)  Max. Spherical Solids: 3/4" (19 mm)  Liquids Handling: Domestic effluent and drain water  Intermittent Liquid Temperature: Up to 140°F (60°C)  Motor/Electrical Data: 1/2 HP 115V, 230V 1Ø, 575V 3Ø; 1 HP 230V 1Ø, 230V,575V 3Ø; oil-filled, permanent split capacitor type, 1Ø, 3450 RPM, 60Hz  Acceptable pH Range: 6-9  Specific Gravity: .9-1.1  Viscosity: 28-35 SSU  Discharge, NPT: 2" (50.8 mm)  Housing: Cast iron  Volute Case: Cast iron  Impeller: Thermoplastic  Minimum Sump Diameter: Simplex: 24" (61.0 cm) Duplex: 36" (91.4 cm)  Power Cord: 20'