Pentax 105G IQZoom 105G Manual - Page 15
automatically
UPC - 027075046764
View all Pentax 105G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
•O O .O 0 O O 1O 1 2. Place the film cartridge in the film chamber by fitting its flat side on the top of the rewind shaft first and then slide the top end of the film cartridge into the camera. 3. Pull the film leader out far enough from the cartridge to reach the take-up spool. Align the tip of the film with the film leader end mark 0 4. Close the back cover. The film automatically advances to the first frame. Notes: • If there is dirt on the film detector 0, the film cannot be wound properly. • Ensure the film is taut as illustrated on the illustration below. Take up any slack in the film by pushing it back into the cartridge. • If the end of the film leader is extremely bent, straighten it or cut off the bent portion. X Slack No ! ()Flat Yes ! 13