Pentax 18981 Operation Manual - Page 4

2 PRECAUTIONS FOR BATTERY USAGE • Misuse of the battery can cause hazards such as leakage, overheating, explosion, etc. The battery should be inserted correctly with regard to polarity (+ and -) marked on the battery and the camera. • Battery performance may be temporarily hindered in low temperatures, but will recover in normal temperatures. • Keep a spare battery on hand for replacement convenience when shooting outdoors or while traveling. • If the built-in flash is used continuously, the battery may become warm, but it does not mean that the battery is faulty; it is one of the battery's characteristics. • Replace the batteries at the same time. Do not mix battery brands, type or an old battery with a new one. It may cause explosion or overheating. Handling the Camera • Always confirm that the camera is working properly when the camera has not been used for a long time, or before important occasions (weddings, trips, etc.). PENTAX is not responsible for consequential damages (costs incurred for photography, lost profits, etc.) arising from failure of this product. • Do not clean the product with organic solvents such as thinner, alcohol, or benzene. • Do not subject to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high. • Do not store the camera with preservatives and chemicals. Storage in high temperatures and high humidity can cause molding. Remove from case and store in a dry and well-ventilated location. • This camera is not waterproof, and cannot be used in the rain or where the camera could get wet. • Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships. • The temperature range for camera use is 0°C to 40°C. • The LCD display may appear black under high temperatures, but will return to normal as temperatures normalize. • The LCD display may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a fault. • Periodic inspections are recommended every one to two years to maintain high performance. • Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, retrieving the camera after decreasing the temperature difference. • Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause a camera breakdown. Wipe dry any rain or water drops on the camera. • Use a blower or lens brush to remove dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens or viewfinder screen. • See "Precautions When Using a CF Card" (p.151) for details on the compact flash memory card (CF Card). • Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction.