Pentax 206636 User Guide - Page 70
Paper Problems, Printed Image Problems, The printed image is out of alignment
UPC - 700908001214
View all Pentax 206636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Paper Problems The paper is jammed in the printer See page 43, "Clearing a Paper Jam." Paper moves through the printer, but nothing appears on the paper Make sure you are using Pentax Quality paper and that you are loading it properly with the print side away from you. See page 41, "Inserting Paper." Also, check the Print Density setting using the "Advanced Software Features," Chapter 2. Paper does not move through the printer even though the motor is running If the release cover has been left open, close it completely. Use Pentax Quality paper only. Heavy paper may not feed through the printer. If the release cover is closed and you are using Pentax Quality paper, the printer may have a damaged drive system. Call technical support. Printed Image Problems The printed image is out of alignment Make sure you are using the Pentax Quality paper. Make sure you are inserting the paper correctly. See page 41, "Inserting Paper." Check to see whether the platen roller is dirty. If it is, clean it. Follow the instructions for "Cleaning the Platen Roller," page 47. The print quality is poor, and the image is too light or dark Raise or lower the density setting using the printer driver. See page 17, "Making Prints Lighter or Darker." Make sure you are using recommended Pentax Quality Paper. Page 58