Pentax 90MC IQZoom 90MC Manual - Page 51
Sync/Slow-Shutter
UPC - 027075040274
View all Pentax 90MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Exposure control: Programmed auto-exposure control with multi metering system, Range: EV9 EV17 at 38mm WIDE, EV12 - EV19 at 90mm TELE in Auto or Daylight-Sync mode (ISO 400), EV4 - EV17 at 38mm, WIDE EV5 -EV19 at 90mm in Slow-ShutterSpeed mode (ISO 400), Automatic exposure compensation in a backlit situation. Flash: Built-in flash with red-eye reduction mode, Automatic discharge in low lighting and backlighting situations in auto mode, Flash ON = Day-light Sync/Slow-ShutterSpeed Sync (up to 2 sec.), Flash-OFF Mode, Bulb-Sync 1/2 sec. - 5min. Flash effective range: 0.65 - 8.5m (38mm WIDE), 0.65 - 4.0m (90mm TELE) (ISO 400 film used). Flash recycling time: Approx. 5 sec. under Pentax testing conditions. Power source: One 3V lithium battery (CR-2 or the equivalent) Battery life: Approx. 8 rolls of 24 exposure film when 50% of shooting uses flash (under Pentax testing conditions) Battery exhaustion warning:( 4=m) appears on the LCD panel, Shutter is locked when ( 4=0 ) is blinking. Size & Weight: 111.5(W) x 61.5(H) x 42 (D) mm (4.4"x 2.4"x 1.7") 210 g (7.4oz) without battery DATE MODEL Date mechanism: Crystal quartz controlled; LCD with digital clock, auto calendar up to 2030. Possible to imprint both standard and panorama format frames. Imprinting mode: "Year, Month and Day", "Day, Hour and Minutes", "-- -- blank", "Month, Day and Year" or "Day, Month and Year". Size & Weight: 111.5 (W) x 61.5(H) x 42 (D)mm (4.4"x 2.4"x 1.7") 2109(7.4oz) without battery REMOTE CONTROL Infrared wireless remote control, 3-seconds delay shutter release, Effective range: Closer than 5m when projected from the camera's front. Power source for Remote Control: One lithium battery CR1620 (replaced by Pentax Service facility) Size & weight for Remote Control: 22.0(W) x50.0(L) x9.5(D)mm (0.9" x2.0" x0.4"), 99(0.3oz) including battery SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION OR ANY OBLIGATION ON THE PART OF THE MANUFACTURER. 47