Pentax IQZoom 120 IQZoom 120 Manual - Page 52

TROUBLE SHOOTING What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Symptoms Causes and Remedies I The shutter cannot be released. • Is the main switch turned off? If so, turn it on. (see page 7.) • Is the battery exhausted? Replace it or insert new battery if it is exhausted. (see page 44.) • Is ( ) blinking on the LCD panel ? If so, the film has been used up. Insert a new roll. (see page 22.) • Is the green lamp blinking ? If so, the camera-to-subject dis- tance is too close. Adjust the camera-to-subject distance until green lamp lights up continuously, and then shoot. (see page 15. • Are you moving the zooming lever ? If so, release it, then shoot. (see page 19.) 2. !sly printed pictures don't look very clear • Did ylo8u) position the autofocus frame on your subject? (see page • Did you obstruct the autofocus window with your fingers, hair or other object when you depres.sed the shutter release button ? (see page 9.) 3. Zoom lens retracted automatically power is turned off automatically he • Did you leave the camera unused for over 3 minutes after the main switch was turned on ? The power is automatically switched off if the camera is left unused for over 3 minutes. (see page 8.) • When the camera is on and left unused for more than 10 minutes in the Remote Control shooting mode, the camera automatically switches itself off to save battery power. Push the main switch again to turn it on (see page 34.) 48