Pentax K-5 Silver K-5 K-5 manual - Page 143
Press the, button., Aim the camera at the subject and press the shutter, release button halfway.
View all Pentax K-5 Silver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
141 3 Press the 3 button. The screen that was displayed before selecting the menu appears again. 4 Aim the camera at the subject and press the shutter release button halfway. The following indicators appear on the status screen. q Shake Reduction On + Horizon Correction On r Shake Reduction Off + Horizon Correction On • Set [Shake Reduction] to l (Off) when using the camera with a tripod or when this function is not needed. • The Shake Reduction function automatically turns off in the following 4 situations. Note that the Shake Reduction function cannot be selected when the following functions are set. - p (Bulb) mode - Self-timer shooting - Remote Control shooting - Mirror Lock-up shooting - when [Auto Align] is set to P (Off) in the [HDR Capture] setting - when using the flash in wireless mode Shooting Functions • The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the Shake Reduction function to become stable, and then press the shutter button gently. If k appears in the viewfinder when you press the shutter release button halfway, the camera is ready to take a picture. • The Shake Reduction function is available with any X compatible PENTAX lens. However, when the aperture ring is set to a position other than the s (Auto) position for a lens with a s position or a lens without an s position is used, the camera will not operate unless [27. Using Aperture Ring] is set to [Permitted] in the [A Custom Setting 4] menu. Set this beforehand. In such cases, however, some functions will be restricted. Refer to "Notes on [27. Using Aperture Ring]" (p.339) for details.