Pentax MZ-S MZ-S Manual - Page 66
Trouble, Shooting
View all Pentax MZ-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
TROUBLE SHOOTING Before requesting service, please check the following points. • Nothing is displayed on the LCD panel. Check 1: Countermeasure Check 2: Countermeasure Check 3: Countermeasure Power is OFF. Turn the power switch to ON ( ts≥f22). Batteries are not inserted or inserted backwards. Check the insertion direction of the batteries and insert the batteries correctly ( r6W- 13). The batteries are exhausted. Replace the batteries with new ones (O-'13). • Shutter does not trip. Check 1: Countermeasure Check 2: Countermeasure Check 3: Countermeasure Check 4: Countermeasure Power is OFF. Turn the main switch to ON (it:Tr22). Batteries are not inserted or are inserted backwards. Check the insertion direction of the batteries and insert the batteries correctly (ter 13). The "Battery Warning" is blinking. Replace the batteries with new ones ( LV- 13). The exposure compensation dial is set to the [D] position, [PF] position or [ISO] position. Set the exposure compensation dial to a position other than the [D] position, [PF] position or [ISO] position.( [61:65) Check 5: The built-in flash is charging. Countermeasure Wait until charging is finished (ii)f- 32). • Subject is out of focus. Check 1: Countermeasure Check 2: The subject to be focused on is not inside the AF frame. Cover the subject you wish to photograph within the AF frame before shooting (6'527). The picture-taking distance is too close. TROUBLE SHOOTING Countermeasure Check 3: Countermeasure Check 4: Countermeasure Check 5: Countermeasure Check 6: Countermeasure Check 7: Countermeasure Move away from the subject to be photographed ( r&f-73). The subject is not suited for autofocus ( tgr 75). Use focus-lock to focus on a subject which is about the same distance as the subject to be photographed (page 81), or set the focus mode switch to the [ME] position and then use the mat screen to focus manually ( rtji-'76) The focus mode switch is at the [MF] position. Use the focusing indicator and mat screen to adjust the focus manually (see page 77). Or set the focus mode switch to the [AF.S] position before taking pictures (tar 74). The focus mode switch is at the [AF.C] position. In the [AFC] (continuous mode) position, the camera continues to focus on the subject to be photographed so that the shutter might be tripped even in a unfocused state (18- 74). The focus point is not set for the subject to be focused on. You can select the focus point position where you wish to focus ( r ' 72). The subject to be focused on is outside the range of focus point. First focus within the range of focus points on the subject you wish to photograph and then set the focus (focus lock) (iM- 80). • Auto-Focus does not function even when the shutter button is pressed halfway down . Check 1: Countermeasure Pentax function No.16 has been set to [2]. If the setting number [2] is set with Pentax function No. 16, focusing is not possible by pressing the shutter button halfway down. Press the AF button to adjust the focus. When focusing by pressing the shutter button halfway down, set to setting number [1] with Pentax Function No. 16. C S