Pentax Optio WG-1 Black Optio WG-1 Black Optio WG-1 Manual - Page 290

Message Description Data being recorded Displayed when you try to switch to Q mode while an image is still being recorded, or when the protect setting or DPOF setting is being changed. It disappears after the image is recorded or the setting is changed. Data being processed Displayed when the camera takes more than five seconds to display an image due to image processing, or when the SD Memory Card or the built-in memory is being formatted. Built-in memory full Displayed if the built-in memory is full when saving a file. No image to be processed Displayed when there are no images or sound files. This image/sound cannot be processed Displayed for files that cannot be processed. No card in the camera Displayed if no SD Memory Card is inserted when "Image/ Sound Copy" is selected from the Playback Mode Palette and the OK button is pressed. The built-in memory is not enough to copy images/sounds Displayed when there is insufficient built-in memory to perform copying. Cannot process correctly Displayed when Red-eye Compensation processing fails. Not enough battery Displayed when the battery is too low during Pixel Mapping. power remaining to Change the battery (p.39) or use the AC adapter kit activate Pixel Mapping K-AC117 (optional) (p.43). No more images can be Displayed when you select more than the maximum selected number of images. The camera will turn off to prevent damage from overheating Appears when the temperature inside the camera exceeds the highest limit. No more logs can be recorded. Delete the record? Displayed when there is no capacity to save a log in the card, or there is a log with the 999 serial number. (Optio WG-1 GPS only) 9 Appendix 288