Pentax Optio WG-1 Black Optio WG-1 Black Optio WG-1 Quick Guide - Page 1

Thank you for purchasing this PENTAX digital camera. The Optio WG-1 GPS / Optio WG-1 is waterproof, dustproof, and shockproof, as shown below, so you can use it in a wide range of outdoor activities. Waterproof/dustproof: JIS grade 8 waterproof and grade 6 dustproof (IP68) Shockproof: Satisfies Pentax drop test (1.5 m height onto a 5 cm thick plywood surface) complying with MILStandard 810F Method 516.5-Shock testing. * Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit. * The camera is not guaranteed to be free of trouble or damage under every condition. 1 Preparing the Camera for Use Prepare your camera for use before you begin using it. Attaching the Carabiner Strap Attach the carabiner strap supplied with the camera as shown in the illustration. Installing the Battery and SD Memory Card Install the battery and SD Memory Card as shown in the illustration. Battery/ card cover Battery/card cover lock lever SD Memory Card socket SD Memory Card Battery lock lever Battery * The SD Memory Card is sold separately. The inside of the battery/card and terminal covers are not waterproof In locations where the camera is exposed to water or dirt such as underwater, at the beach, in a kitchen, etc., make sure that the battery/card and terminal cover lock levers are firmly locked so that they won't open unexpectedly. Do not open the covers in such locations. When removing the battery or card, avoid surroundings where the camera may be exposed to water or dirt, and make sure the camera, battery, card, and your hands are completely dry. Checking the Contents of the Package Check that your camera comes complete with the items listed below. Camera (Optio WG-1 GPS / Optio WG-1) Carabiner strap (O-ST117/O-ST118) Software (CD-ROM) S-SW117 USB cable (I-USB7) AV cable (I-AVC7) Rechargeable lithium-ion battery (D-LI92) Battery charger (D-BC92) AC plug cord Strap (O-ST104) Macro stand (O-MS1) Operating Manual Quick Guide (this guide) Utilities Guide for GPS (WG-1 GPS only) Names of Parts and MonitorIndicators Front Shutter release button Power switch/Power lamp (green) Back Macro light Terminal cover lock lever Terminal cover Flash Lens Speaker/Microphone Remote control receiver Self timer lamp/ Focus assist Display Tripod socket Battery/card cover lock lever Battery/card cover PC/AV terminal HDMI terminal Battery lock lever In this Quick Guide, the arrow keys to 4 be pressed are indicated as shown on the right. 2 5 3 Monitor Indicators Following indicators are displayed in the still picture capture mode. Normal display in the Still Picture Capture Mode Drive mode Focus mode Eye-Fi communication status Flash mode Digital zoom icon Shooting mode Positioning status Battery level Face Detection P GPS Date imprint setting EV compensation Shutter speed Aperture DATE +1.0 1/250 F3.5 Camera shake 38 reduction '11/02/02 14:25 Memory status Built-in memory (without card) Focus frame D-Range Setting World Time setting Date and time SD Memory Card Remaining image Card is write-protected storage capacity No icon : Hometown : Destination Battery Level Indicator You can check the battery level by the indicator on the display. Screen Display (green) (green) (yellow) (red) [Battery depleted] Battery Status Adequate power remains. Battery is running low. Battery is running very low. Battery is exhausted. The camera turns off after this message appears. 2 Turning the Camera On Press the power switch. The camera turns on and is ready to take still pictures. Press the power switch again to turn the camera off. Make the Initial Settings. The [Language/ ] screen appears when the camera is turned on for the first time. Select the desired language and then set the date and time. 1 Use the four-way controller (2345) to select the desired language. 2 Press the 4 button. The [Initial Setting] screen MENU Cancel OK OK appears. Memo If you accidentally select the wrong language and press the 4 button, press the four-way controller (5), use the four-way controller (2345) to select the desired language, and then press the 4 button. The [Initial Setting] screen appears in the selected language. Initial Setting English Hometown New York DOSFTF Settings complete MENU Cancel 3 Press the four-way controller (3) to move the frame to [W Hometown]. Initial Setting English Hometown New York DOSFTF Settings complete MENU Cancel 4 Press the four-way controller (5). The [W Hometown] screen appears. Hometown City New York DST MENU Cancel 5 Use the four-way controller (45) to choose a city. OK OK 6 Press the four-way controller (3) to move the frame to [DST] (Daylight Saving Time). 7 Use the four-way controller (45) to select O or P and press the 4 button. The [Initial Setting] screen reappears. 8 Press the four-way controller (3) to select [Settings complete] and press the 4 button. The [Date Adjustment] screen appears. 9 Press the four-way controller (5) to select [mm/dd/yy], then use the four-way controller (23) to choose the date format. Date Adjustment Date Format mm/dd/yy 24h Date 01/01/2011 Time 00:00 Settings complete MENU Cancel 10 Press the four-way controller (5) to select [24h], then use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display). 11 Press the four-way controller (5), then press the four-way controller (3) to move the frame to [Date]. 12 Press the four-way controller (5) to select [01] (month), [01] (day) or [2011] (year), then use the four-way controller (23) to set the current date and time. 13 Press the four-way controller (5), then press the four-way controller (3) to move the frame to [Time]. 14 Set the time in the same manner as in 12. 15 Press the four-way controller (3) to select [Settings complete] and press the 4 button. Date Adjustment Date Format mm/dd/yy 24h Date 01/01/2011 Time 00:00 Settings complete MENU Cancel OK OK Formatting an SD Memory Card Use this camera to format (initialize) an SD Memory Card that is unused or has been used on another camera or digital device. Be aware that formatting will delete all the data stored in the SD Memory Card. For how to format an SD Memory Card, refer to the Operating Manual (p. 230). Continue on the reverse side.