Pentax PC35AF-M SE Date PC35AF-M SE Date Manual - Page 1
Pentax PC35AF-M SE Date Manual
View all Pentax PC35AF-M SE Date manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PENTAX® IMC35#F-M _S-_ -ZORTE PC35AF-M ___SZTRTE - JJNI PEIVTAX LENS F3 a N 1-1S, X Art 85 9 V OPH la al am °1,f4 Because the batteries for the dating unit have been installed in the factory, they may be slightly below full capacity due to spontaneous discharging. Also, because the date and time have been set in the factory, readjust them in your country. Film • DX films with ISO ratings from 64 to 1600 can be used. The film speed is automatically switched in the dating unit. •The only non-DX film that can be used is one with ISO 100. When shooting • If the data printing section in the picture area is too bright, the recorded data may be difficult to see. Frame the picture so that reflections or white objects may not overlap the data printing section. • The Year/Month/Day and Hour/Minute data cannot be imprinted on the same picture. • Before shooting, be sure to check the battery condition. • When the shutter is released, the letters "PRINT" will appear in the Display Window, indicating that imprinting has been completed. (INSERTING BATTERIES O 2 1 1 Ii • The data-recording unit is powered by two alkaline (JIS LR44) or G13 silver-oxide (JIS SR44) or equivalent batteries. al> 1. After opening the camera back, remove the battery chamber cover by sliding it as illustrated in order of • •. 2. Insert the two batteries correctly as indicated. 3. Replace the battery chamber cover by fitting the cover tab into the notch and sliding it as illustrated in order of • •. • Insert the batteries correctly. • When the data-recording unit is not in use for a long time, remove the batteries from the chamber and keep them beyond the reach of small children.