Pentax Program Plus Program Plus Manual - Page 35
Viewfinder
View all Pentax Program Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Viewfinder display Shutter speed Aperture information LCD information LCD P1OOO F22 P 2" F 1. fa ota is - 125 :25 25 o 9 f + 3 3 Meaning These displays show exposure combinations beyond the meter coupling range in the Programmed AE mode. Correct exposure cannot be obtained. Overexposure. The camera is in the Aperture-priority AE mode. It has chosen the fastest possible shutter speed for the aperture you have set. But the picture will still be overexposed unless you select a smaller aperture. Underexposure. The camera is in the Aperture-priority AE mode. It has chosen the slowest possible shutter speed for the aperture you have set, Try selecting a larger aperture. If the flickering stops, take your picture, If not, there is insufficient light for a normal exposure. These warnings appear in the Metered Manual mode. +3 means you are three stops over normal exposure. -3 means three stops under. Adjust aperture or shutter speed until you see the t.0 sign. Beyond meter coupling range in Metered Manual mode. It is not possible to get correct exposure by changing aperture or shutter speed. Use flash or a different sensitivity film. _ If you set the shutter dial to the modes other than "AUTO" when the lens aperture ring is set at "A", LCD displays "E" to show an erroneous setting. P :ZS 4 t 000 Weak battery warning. In all exposure modes, when you see a row of 000 alternating F8 with exposure information, it's time to change batteries, t 1 31•