Pentax UC-1 UC-1 Manual - Page 11
Loading
View all Pentax UC-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
FILM LOADING • (5) I Slide the back cover release lever down in the direction of the arrow to open the back cover as illustrated. 2 Place the film cartridge in the film chamber by fitting its flat side on top of the rewind shaft first and then slide the top end into the camera. 3 Pull the film leader out far enough from the cartridge to reach the take-up spool 0. Align the tip of the film with the film leader end mark 0. Notes : • Make sure the film is placed properly be- tween the guide rails 9. • If there is dirt on the film detector 0, film cannot be wound properly. • Make sure the film is taut as illustrated. Take up any slack in the film by pushing it back into the cartridge. • If the end of the film leader is extremely bent, straighten it or cut off the bent portion. x Slack NO! O Flat YES! 7