Pentax WPi Operation Manual - Page 72
Taking Underwater Pictures (Underwater Mode), Use the four-way controller
![]() |
UPC - 027051141599
View all Pentax WPi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Taking Pictures 4, 5 1, 2 3 B Taking Underwater Pictures (Underwater Mode) This camera has been proven to comply with JIS Class 8 waterproof 4 performance and can be used to take pictures at a depth of 1.5 m continuously for 30 minutes. In addition, this camera complies with JIS Class 5 dustproof performance (IP58). Use the Underwater mode to take underwater pictures that capture the blueness of the sea. 1 Press the four-way controller (3) in A mode. The Capture Mode Palette appears. 2 Use the four-way controller (2345) to select B (Underwater). 3 Press the 4 button. The Underwater mode is selected and the camera returns to capture status. 4 Press the shutter release button halfway. The focus frame turns green if the subject is in focus. 5 Press the shutter release button fully. The picture is taken. • Before taking pictures underwater, make sure that there is no dirt or sand on the waterproof packing of the battery/card cover and check that the cover is securely locked. (p.23) • Before opening the battery/card cover after using the camera underwater, make sure that there is no water, dirt or sand on the battery/card cover or anywhere on the camera. Wipe the camera before opening the cover. Waterproof and Dustproof Function 1p.5 70
![](/manual_guide/products/pentax-wpi-operation-manual-6181325/72.png)