Pentax X70 User Manual - Page 8
Refer to Precautions When Using an SD Memory Card p.36 regarding - software
UPC - 027075149861
View all Pentax X70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
• The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a fault. • Periodic checks are recommended every 1 to 2 years in order to maintain high performance. • If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag, and take the camera out when the difference in temperature has subsided. • Refer to "Precautions When Using an SD Memory Card" (p.36) regarding the SD Memory Card. • Please note that formatting an SD Memory Card or the built-in memory will delete all data; however it may still be possible to recover that data using off-the-shelf data recovery software. Please manage your camera memory at your own risk. • Please do not press forcefully on the display. This could cause breakage or malfunction. • When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera. • The AC plug cord supplied with the camera is for exclusive use with the battery charger D-BC92. Do not use it with any other equipment. • Storing the battery fully charged may decrease the battery performance. Avoid storing it especially in high temperatures. If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery's service life. • Charging the battery a day before use or on the day of use is recommended. • Do not hold or force the extended part of the lens. This can cause a malfunction. 6