Pfaff 1199 Owner's Manual - Page 5

Electrical connection Push plug A into the machine socket and plug B into the wall socket. Press master switch 11 . Your machine is now switched on and ready for sewing. Foot control Place the foot control under the table. Press down its pedal. The machine starts sewing. The more the pedal is depressed, the faster the machine will run. Removing bobbin case and bobbin Raise the needle. Remove bed cover 1 3 or open free arm cap 24. Lift latch K, pull Out the bobbin case, release the latch and take out the bobbin. The bobbin cannot fall out as long as you keep latch K raised. Disengaging the sewing mechanism Before you start winding the bobbin, disengage the sewing mechanism. To do this, hold the balance wheel steady and turn the stop motion knob toward you. After bobbin winding, turn the knob in the opposite direction to re-engage the sewing mechanism again.