Pfaff 262-261 Owner's Manual - Page 48
lengthwise.
View all Pfaff 262-261 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
53670 Darning Machine Setting: Stitch width dial A=0 Needle position lever B=4 Attach darning foot, as instructed on page 24, drop machine feed, and lower presser bar lifter. Since your machine is fitted with a vibrator, there is no need to place the fabric into darning hoops. Simply guide it under the needle free-hand. .4 Remember that 'a stitch in time saves nine" and reinforce spots that hae worn thin with short stitches made lengthwise and across worn section at high speed. Triangular tears are best darned with close stitches made across and lengthwise. V DR 087 DR 089 Ta mend small and medium-size holes, trim ragged edges with the fabric grain. First stitch back and forth across the hale from one side to the other with the machine running at high speed. Then turn the fabric at right angles and sew back and forth aver preceding work with short stitches. This anchors the threads in the unworn area around the hale. Darning foot No. 53670 can be used to mend woolen pullovers and other woolen articles. Lace filler thread through the hole in the foot. Place thread back and forth across damaged spat and anchor it in unworn area. Sew across filler thread with zigzag stitches (A=2.5). 47 DR 088