Pfaff 3.2 Owner's Manual - Page 17

Needle threader, Threading for twin needle - expression manual

Get Pfaff 3.2 PDF manuals and user guides View all Pfaff 3.2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Needle threader The needle threader allows you to thread the needle automatically. The needle must be in the up position to use the built-in needle threader. We also recommend lowering the presser foot. 1. Use the handle to pull the needle threader all WKHZD\GRZQ7KHWKUHDGHUKRRN * VZLYHOV through the needle eye.  3ODFHWKHWKUHDGIURPWKHEDFNRYHUWKHKRRN + DQGXQGHUWKHWKUHDGKRRN *  3. Let the needle threader gently swing back. The hook pulls the thread through the needle eye and forms a loop behind the needle. Pull the thread loop out behind the needle. Note: The needle threader is designed to be used for size 70-120 needles. You cannot use the needle threader for size 60 needles or smaller, a wing needle, twin needle or triple needle. There are also some optional accessories that require manual threading of the needle. H G PFA Threading for twin needle Replace the sewing needle with a twin needle. Make sure that the presser foot is raised and the needle is in the up position.  3ODFHWKHWKUHDGRQWKHVSRROSLQDQGÀWD spool cap of the right size. Raise the auxiliary VSRROSLQ6OLGHRQDODUJHVSRROFDSDQGDIHOW pad. Place the second thread on the spool pin.  3XOOWKHWKUHDGVLQWRWKHWKUHDGJXLGH $ IURP the front to the back. Pull both threads from the right underneath the bobbin winder thread JXLGH % RQWKHSUHWHQVLRQGLVF &  3. Thread down through the right-hand threading slot and then upwards through the left-hand threading slot. Make sure that you pass one thread to the left and one thread to WKHULJKWVLGHVRIWKHWHQVLRQGLVN '   %ULQJWKHWKUHDGVIURPWKHULJKWLQWRWKH WDNHXSOHYHU ( DQGGRZQLQWKHOHIWKDQG threading slot. Make sure that one thread is LQVLGHWKHQHHGOHWKUHDGJXLGH ) DQGWKH other one outside. Make sure that the threads do not become twisted together. 5. Thread the needles. Note: If using specialty threads (such as metallic threads) its weight and irreglular surface increases the thread tension. By reducing the tension, the risk of needle breakage is prevented. E F quilt expression™ 4.2 C C B D B A 2:5 Preparations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
2:5
PFA
C
B
D
H
G
A
C
E
F
B
Preparations
Needle threader
The needle threader allows you to thread the
needle automatically. The needle must be in the up
position to use the built-in needle threader. We also
recommend lowering the presser foot.
1.
Use the handle to pull the needle threader all
through the needle eye.
3.
Let the needle threader gently swing back. The
hook pulls the thread through the needle eye
and forms a loop behind the needle. Pull the
thread loop out behind the needle.
Note: The needle threader is designed to be used for size
70-120 needles. You cannot use the needle threader for
size 60 needles or smaller, a wing needle, twin needle or
triple needle. There are also some optional accessories
that require manual threading of the needle.
Threading for twin needle
Replace the sewing needle with a twin needle.
Make sure that the presser foot is raised and the
needle is in the up position.
spool cap of the right size. Raise the auxiliary
pad. Place the second thread on the spool pin.
the front to the back. Pull both threads from
the right underneath the bobbin winder thread
3.
Thread down through the right-hand
threading slot and then upwards through the
left-hand threading slot. Make sure that you
pass one thread to the left and one thread to
threading slot. Make sure that one thread is
other one outside. Make sure that the threads
do not become twisted together.
5.
Thread the needles.
Note: If using specialty threads (such as metallic
threads) its weight and irreglular surface increases
the thread tension. By reducing the tension, the risk of
needle breakage is prevented.
quilt expression™ 4.2