Pfaff 90 Owner's Manual - Page 40
Pfaff 90 Manual
View all Pfaff 90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
InstructionsforButtonholing Sew first side over a filler cord. When beginning of seam reaches red end of slide indicator on buttonhole gauge, it is the right length. Leave needle in fabric on right side of its throw. 2 Lift foot, turn fabric around clockwise, using needle as a pivot. Lower foot, take one stitch to the left, pull filler cord taut and lay it parallel to completed line of stitching. 3 Turn dial A until it is caught in second notch (or stops at 4). Make 4 to 6 bartack stitches, slightly holding the material to reduce length of bar. D pun a) C 5) (/) 0 C 0 U 0 5) D 0 4 Change dial A to "1 /" (2). Trim filler cord at end of first stitch row. Sew second row and stop about 4 to 6 stitches (1/ic") from end of first row. 5 Turn dial A to second notch position (or "4"). Make second tack, as instructed above (under 3). 6 Turn dial A to "0" and make 3 or 4 fastening stitches. 7 Trim both the sewing and filler threads. Open the buttonhole with your seam ripper. Be careful not to injure the bortacks. 31