Pfaff 95 Owner's Manual - Page 33
Pfaff 95 Manual
View all Pfaff 95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Sew the first seam over the filler cord. When the buttonhole is the right length, leave the needle in the fabric on the right of its throw. Lift the sewing foot, turn the fabric around clockwise by half a turn, place the filler cord around the needle and pull it forward, placing it in the left groove ofthefoot. Lower the foot and let the needle descend on the left of its throw. Move stitch width control (18) to the second notch R 2, make 4 to 6 bartack stitches, slightly holding the materials to reduce the length of bar. Push stitch width control (18) bock to the first notch R 1 and sew the second button hole seam, stopping about 1/ inch from the end of the first seam. Push stitch width control (18) to the second notch R 2 and sew the second tack, slightly holding the material to reduce the length of bar. Flick the stitch width control all the way to right and make 3 to 4 fastening stitches. Slightly pull the filler cord and trim it close to the bar. Open the buttonhole with your seam ripper which is included in the accessory box. 31