Pfaff ClassicStyle 1529 Owner's Manual - Page 27
Changing the needle, Setting the needle thread tension, Dropping the feed dog
View all Pfaff ClassicStyle 1529 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Operate your Pfaff select 1:15 Changing the needle A Switch off the main switch. To remove: Lower the presser foot and move the needle to its highest point. Now loosen the needle screw (18) and pull the needle down. To insert: The Áat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it goes. Hold the needle and tighten the needle screw (18) Àrmly. Setting the needle thread tension Set the required needle thread tension (10) with the help of the mark B. B The normal setting for sewing is 4 to 5. For embroidering, darning and buttonhole set the tension between 2 and 3. Dropping the feed dog For certain sewing work, e.g. darning the feed dog has to be dropped. To do this, open the bobbin case/hook cover and move slide C fully to the right. Now the feed dog is dropped. C 1:15