Pfaff classicstyle home 2029 Owner's Manual - Page 23
To change
View all Pfaff classicstyle home 2029 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Preparations Disengaging the IDT Hold the IDT with two Àngers at the ribbed ankle. Press the IDT (14) down, then pull it away from you and release the IDT slowly upward. Lowering the feed dog For certain sewing work such as free-motion quilting or darning and when the machine must be cleaned, the feed dog has to be lowered. To do this, open the bobbin door (26) and press slide B fully to the right. Now the feed dog is lowered. To B switch on the feed dog press slide B to the left. Raise the presser foot before lowering or raising the feed dog. Altering stitches A Adjust the length, width, balance, density or needle position of stitches by touching the appropriate -/+ buttons to the right of B the window. Each change is visible in the window. If you tap on your foot control while sewing, the needle can be C raised or lowered. This does not change the pre-set needle stop position To change: Stitch width Pattern width Needle position for straight stitches Stitch length Pattern length Stitch density Pattern density Balance Use -/+ buttons: A B C 2:13