Pfaff coverlock 4852 Owner's Manual - Page 36
Attaching the converter, Switch off the electrical power
![]() |
View all Pfaff coverlock 4852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Attaching the converter Switch off the electrical power The converter 28 must be attached for all two thread seams (exception: Program 01) and the two needle three thread assembly seam. Open the swivel plate and remove the converter 28 from its storage place. Position the upper overedge looper 18 right next to the needle by turning the handwheel towards you. Push the tip of the converter into the back side of the upper overedge looper until it clicks into place and push the converter onto the overedge looper bracket. To remove the converter, gently push the point of the converter from the eye of the upper overedge looper. You can now remove the converter by pulling it upwards from the overedge looper bracket. 34
![](/manual_guide/products/pfaff-coverlock-4852-owners-manual-22f6273/36.png)
34
34
Attaching the converter
Switch off the electrical power
The converter
28
must be attached for all
two thread seams (exception: Program 01)
and the two needle three thread assembly
seam. Open the swivel plate and remove the
converter
28
from its storage place.
Push the tip of the converter into the back
side of the upper overedge looper until it
clicks into place and push the converter onto
the overedge looper bracket.
Position the upper overedge looper
18
right
next to the needle by turning the handwheel
towards you.
To remove the converter, gently push
the point of the converter from the eye of
the upper overedge looper. You can now
remove the converter by pulling it upwards
from the overedge looper bracket.