Pfaff creative 1469 Owner's Manual - Page 52
accumulated - how to oil
View all Pfaff creative 1469 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Cause: Remedy: 5. Machine feeds irregularly or not at all Lint has accumulated between tooth rows of feed dog. Remove needle plate and clean out lint. Feed dog dropped. (Drop-feed control is Flick drop-feed control to the left. at right.) 6. Machine runs with difficulty Thread ends in hook raceway. Remove thread ends and put a drop of oil into hook raceway. 7. Electronic bobbin thread monitor does not work Thread ends and dirt have collected in the free arm cover over the indicator lamp, in the hook raceway, in the bobbin case, behind the hook and on the second indicator lamp to the right behind the hook. Remove thread ends and dirt. Special. care should be taken in the area round the second indicator lamp. 8. Machine does not sew the program entered Switch the machine off, wait about 30 seconds, then switch it on again. Again enter the desired program. 9. The sewing lamp lights up, but the machine is not running Fuse is faulty. Insert new fuse. 10. Fundamental rules Never run a threaded machine unless there is a piece of fabric under the sewing foot. If you have to leave the machine, even for a short while, be sure to switch off the master switch. This is particularly important when children are around.