Pfaff creative 1473 Owner's Manual - Page 80

rli4 ffiI i+frf.. 44+4+'+4, 1 2 I utomatic darning prog -- ewing thread: embroidering and darning thread The darning program 158 is mainly intended for laming damaged spots. Stitch over the damaged pot at the required length, then press the reverse" key. The length of the darning seam is ow memorized in the computer. The Pfaff Crea ive then automatically stitches over the lamaged area. The programmed darn size can then be repeated s often as required. n darning program 159 when key 18 is pressed, he machine will stitch over the darning area :rosswise and repeat the same size continuously thout further adjustment. the worn area is wider than the darning program, he darning program must be repeated several imes until the damaged spot has been covered ompletely, )epending on the fabric, the darn may turn out me-sided. If so, this can be compensated by bal mce key 5. Example: 1g.1:Using balance key, select + 1 to + 3 or more, if required. rig. 2: Using balance key, select - 1 to -3 or more, if required. you wish to darn a larger area we recommend to ise buttonhole foot 5A. The darning program iust be repeated several times until the Jamaged spot has been covered. Changing the darning length If you wish to change the programmed darning length, press the "pattern start key". The darning length is cleared and a new length can be pro grammed. 73