Pfaff creative 3.0 Owner's Manual - Page 35

Embroidery settings Presser foot height Adjust the height of the presser foot in Embroidery stitch-out mode. Use the + and - icons to either raise or lower the height of the presser foot. Some embroideries may build up under the presser foot. If there is not enough space between the presser foot and the embroidery, the top thread will form loops on the underside of the embroidery. Increase the presser foot height in small steps until the embroidery moves freely under the presser foot. Note: Since the Dynamic Spring Foot 6D (optional 820991096) measures the fabric thickness, the option to adjust presser foot height in embroidery is only available if Dynamic Spring Foot 6D for embroidery is deselected. Dynamic spring foot 6D When embroidering, use the optional Dynamic spring foot 6D (part number 820991-096, available at your authorized PFAFF® dealer). Activate the "Dynamic spring foot 6D" function. If using another type of embroidery foot, e.g. Embroidery/Sensormatic free-motion foot 6A, deactivate Dynamic spring foot 6D in the settings menu. Cut jump stitches Your machine features the automatic function Cut jump stitches. This function saves you time trimming after the embroidery is completed. When Cut jump stitches is selected your machine will trim the top jump stitch thread and pull the thread end to the underside of the fabric as you embroider. When deselected, the machine will stop after a few stitches in every color change to let you cut the threads manually. Note: Your machine will also cut the thread after you have changed to a new color. Hold the thread end when you start embroidering again, so that you can easily remove the thread end when cut. Designs marked with this symbol are programmed for Cut jump stitches. Cut jump stitches commands can be added to any design using the software package downloaded via PFAFF® website (see page 2:12). Thread snips for embroidery Thread snips for embroidery is automatically activated by default. This function automatically cuts the threads DWFRORUFKDQJHVRUZKHQDQHPEURLGHU\LVÀQLVKHG Machine information The machine information tab contains the software version, memory usage in machine and license information. Presser foot height control 3:5 Machine settings & buttons