Pfaff creative 4.0 Owner's Manual - Page 120
Cleaning the machine
View all Pfaff creative 4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Maintenance Cleaning the machine To keep your sewing machine operating well, clean it often. No lubrication (oiling) is needed. Wipe the exterior surface of your machine with a soft cloth to remove any dust or lint built up. Wipe the PFAFF® HD screen with a clean, soft and damp cloth. Cleaning the bobbin area Note: Lower the feed dogs by pressing presser foot up and extra lift. Turn off the machine. Remove the presser foot and slide off the bobbin cover. Place the screwdriver under the stitch plate as shown on the picture and gently turn the screwdriver to pop off the stitch plate. Clean the feed dogs with the brush found with the accessories. Cleaning under the bobbin area Clean the area under the bobbin case after sewing several projects or any time you notice an accumulation of lint in the bobbin case area. Remove the bobbin case holder (A) covering the front part of the bobbin case by lifting it up. Remove the bobbin case (B) by lifting it up. Clean with the brush. Note: Use caution when cleaning around the thread snips knife. Put the bobbin case and the bobbin case holder back in place. Note: Do not blow air into the bobbin case area. The dust and lint will be blown into your machine. Note: When using the optional accessory PFAFF® Embroidery Cutwork Needles, it is neccessary to clean the bobbin area after each embroidered design/project. B A C Replacing the stitch plate With feed dogs lowered, place the stitch plate with the knob Àtting into the notch at the back (C). Press the stitch plate down until it clicks into place. Slide on bobbin cover. 11:2