Pfaff expression 3.2 Owner's Manual - Page 37

3:9

Sewing

Manual buttonhole

1.

To sew a manual buttonhole in four steps, use

presser foot 5M.

buttonhole. The graphic display will show the

part and sewing direction of the buttonhole

that is being sewn.

the bartack and the second column. When the

again to sew the second bartack.

Note: The repeat icon will be highlighted, showing

you that repeat is activated. You can repeat the

buttonhole as many times as you wish by pressing

the foot control.

The machine will stop automatically when the

buttonhole is complete.

Sew on a button

and select the button sewing stitch.

2.

Lower the feed dogs.

3.

Place the button under the presser foot holder.

Use the mirroring function to make sure the

holes in the button are aligned with the swing

of the needle and the width is appropriate

for the actual button. If necessary change the

width between holes with the width + and -

buttons.

stitches that will fasten the button on the fabric

in steps of two, using the left and right arrow

buttons on the wheel.

program for you and then tie-off and stop.

Note: Use the multi-purpose tool to create a thread

shank for your button. You can also use the Sew-on

Button Foot, available as an optional accessory.

Pfaff expression 3.2 Owner's Manual - Page 37

Manual buttonhole, Sew on a button

Page 37 highlights