Pfaff hobby 1037 Owner's Manual - Page 9

REGULATING THE PRESSER FOOT PRESSURE 1. Push down inner pin (A) to increase pressure. (Light to medium fabrics) 2. Push down outer ring to release pressure. (Heavy fabrics) 3. Insufficient pressure may cause poor feeding, skipped stitches, or difficulty in guiding the fabric. 4. No pressure adjustment is required when darn ing or sewing embroidery. DROP FEED A B A Push feed lever down to drop feed below needle plate for darning, embroidery, and button sewing. 8. Push feed ever up to raise feed above needle plate for normal sewing. 13 - - CHANGING NEEDLE 1. Raise needle bar to its highest position. 2.Loosen needle clamp screw and remove old needle. 3. With the flat side of the needle facing away from you, insert needle as far up as it will go. 4.Tighten the needle clamp screw securely. -14-