Pfaff hobby 301 Owner's Manual - Page 40
einhängen - how to thread a
View all Pfaff hobby 301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ReiFverschluB einnähen NáhfuB: ReiBverschluBfuB Slichlange: 2-3 Stich: B Geradstich Stichlage Mute Garn: Nahgarn So wird der ReiBverschluBfut3 eingerastet. Fu13 mit dem hinteren Steg in die hintere Nute W einhängen und die Sohle nach oben drücken. bis der vordere Steg X einrastet. Der FuB kann in die Positionen rechts, links (Abb. S) oder Mitte gescho ben werden. Beidseitig verdeckt eingenähter Reil3verschluB Reiltverschlul3 einheften. Den NàhfuB nach links bis zum Anschlag schieben. Geöffneten Reil3verschlul3 so unter den FuB legen, daB die Zãhne am rechten Fuhrungssteg entlang tauten (Abb. T). Reil3verschlul3 bis Ca. zur Hdlfte in der gewunschten Breite absteppen. Nadel im Stoff stehen lassen, Ndhful3 anheben und ReiBverschlul3 schliel3en (Abb. U). Ndhful3 senken. die Naht bis zum ReiB verschlul3ende weitertühren und die Quernaht steppen. Die zweite ReiBverschluBseite parallel im gleichen Abstand nähen. Kurz vor Nahtende Nadel im Stoft stehen lassen. NähtuB anheben und den ReiBverschluB bftnen (Abb. V). Nähtul3 senken, Naht zu Ende nähen. 4 Inserting zippers Sewing foot: zipper sewing toot Stitch length: 2 to 3 Stitch: B Straight stitch, middle needle position Thread: sewing thread This is how the zipper foot is engaged Insert the toot with the back pin in the back groove W and push the shoe of the toot upwards. until the front pin X snaps in. The zipper toot can be pushed to the positions: ett (Fig. S), right, or centre. Completely concealed zip fastener Baste in zip by hand tirst. Push the zipper toot to the left as tar as it will go. Place the open zip under the toot so that its teeth run along the right guiding edge on the sole of the toot (Fig. T). Sew about halt the length of the zip at the required width. Leave the needle down in the material, raise the zipper foot and close the zip (Fig. U). Lower the zipper foot again, continue the seam and then sew across the end. Sew the other side of the zip at the same margin. Shortly before the end of the seam leave the needle down in the material, raise the zipper toot and open the zip (Fig. V). Lower the zipper foot again and sew to the end. 36