Pfaff hobby 4240 Owner's Manual - Page 24
Pfaff hobby 4240 Manual
View all Pfaff hobby 4240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
_A Changing the needle Switch off the on/off switch (13). Removal: Lower the presser foot and raise the retaining screw (22) and remove the needle by needle pulling to its highest position. it downwards. Loosen the needle Insertion: insert the The flat side of the needle A must be facing the needle by pushing it upwards as far as possible. rear. Hold Lower the the needle presser foot and tighten and the retaining screw (22). V Adjusting the needle thread tension Turn the needle thread tension (3) to the desi red setting. The normal setting for sewing is between 4 and 5 and for sewing buttonholes between 2 and 3 (see page 28). Darning plate For certain sewing procedures such as sewing on buttons, the feed dog (27) must be cove red with the darning plate to stop the fabric being fed. Place the darning plate over the feed dog (27). The narrow half of the darning plate must be facing the front. 20