Pfaff hobby 808 Owner's Manual - Page 20

Special sewing feet G Zipper foot Insert the rear pin in groove I, and the front pin in groove J. The zipper foot can be adjusted sideways for stitching along the right or left zipper chain. H = Darning foot Raise the needle bar. Push bracket M toward the back and hold it there. Insert the pin of the foot in hole K and attach the foot so that it rests against its stop. Release bracket M so that it bears against screw N. Tighten screw L. Buttonhole settings On models 5 to B. 802 to 807 set utility-stitch dial Push let it lever snap 6 to into buttonhole symbol G position. Set the stitch and density in the buttonhole sector of stitch length control 11. Move zigzag-stitch 4 to the right for straight stitching. lever Insert the filler cord as follows (Fig. J): place it over the rear lug of the foot, pull it taut and clamp it in front lug K. As you sew, arrow L moves along scale M. This determines the buttonhole length. 16