Pfaff hobbylock 4762 Owner's Manual - Page 22

Important note on threading: The needle threads must always be inser ted last in order to avoid mistakes with the left looper thread and thread breakage or missed stitches. The thread must also be removed from the needle(s) if the looper threads break. Re-insert the looper thread first, then re-thread the needle(s). Thread reel change on threaded machine Cut the threads close to the thread spool and set the new thread reels in place. Tie together the threads still in the machine and the new threads, and pull the threads out of the needles. Set all the thread tensions to -5. Now pull on the needle threads until the knots are about 15 cm past the last thread guide before the needles. Cut the knots off and pull the threads through the respective needle eyes. The looper threads can be pulled continuously past the looper eye and laid to the left underneath the sewing foot. 18