Pfaff passport 3.0 Manual - Page 21

19

1

3

2

5

9

4

6

7

8

Buttons

passport™ 2.0

If you press the reverse button while sewing, the

machine sews in reverse for as long as you keep the

button pressed.

Reverse is also used when sewing the darning

stitch.

Press this button to start or stop the machine

without using the foot control. Press the button

once to start and press it again to stop.

The speed control lever sets the maximum sewing

speed. To increase sewing speed, slide the lever up,

to decrease sewing speed, slide the lever down.

Press this button to show the presser foot

recommendation on the LED display. If a dot is

visible in the lower right corner of the screen, the

IDT™

system should be engaged.

For immediate tie-off press the button while

sewing. The machine sews tie-off stitches

immediately and stops automatically.

To set the machine to perform a tie-off at the end

of a stitch, press the button before starting to sew.

The LED light next to the button becomes lit. After

sewing the desired length of stitching, press the

reverse button while actively sewing. The machine

will complete the current stitch, tie-off and stop

automatically.

Note: The tie-off function is not available for stitches

15-20.

Press this button to move the needle up or down.

The setting of the needle stop position is changed

at the same time.

You can also tap the foot control to raise or lower

the needle.

Increase or decrease the stitch length using the “+”

and “-” buttons.

Increase or decrease the stitch width using the “+”

and “-” buttons.

For straight stitches, use the “+” and “-” buttons to

change the stitch position.

Note: There are 29 needle positions available. 3.5 on the

display is the center position.

Press a combination of the 0 to 9 buttons to select

the stitch represented by that number.

Pfaff passport 3.0 Manual - Page 21

passport™ 2.0

Page 21 highlights