Pfaff select 2.0 Owner's Manual - Page 18
Threading
View all Pfaff select 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Operate your Pfaff select Threading B Threading the needle thread Switch off the main switch Raise the presser foot lifter (15) and turn the handwheel until the take-up lever (10) has moved to the top. Place the thread on the spool pin (9) and Àt the corresponding spool cap. Now, using both hands, pull the thread into guide A and under thread guide hook B. Pass the thread through the lefthand threading slot C and downwards. Pull the thread around stop D into the righthand threading slot and upwards E to the takeup lever F. The thread must be pulled into the take-up lever F from left to right and downwards again in the right hand threading slot. Floss the thread from the side behind one of the two thread guides H. To thread the needle, stick the thread from front to back through the needle eye. To thread the needle using the needle threader, please refer to the next page. A F CEG D H 18