Pfaff select 3.0 Owner's Manual - Page 19

Operate your Pfaff select A B C Needle threader (Model 4.0) To make threading the needle easier and quicker, use the PFAFF needle threader (22). Lower the presser foot. Turn the handwheel until the needle is at its highest position. Place the needle thread under hook A and hold it taut. Move the needle threader fully downwards and turn it towards the needle so that the small hook B goes through the needle eye. Place the thread into the hook from below. Turn the needle threader towards the rear, releasing the thread carefully, and allow the threader to move upwards. You can now pull the thread through the needle eye. Threading the twin needle Insert the twin needle. Fit the second spool pin and place one spool of thread on each pin. In the left threading slot (12) you will Ànd tension disk C. During threading, make sure that you pass one thread left and one thread right over tension disk C. Carry on threading in the usual way, but make sure the threads are not twisted with each other. Pull the threads right and left into thread guide (23) and thread the needles. Note: You cannot use the needle threader for a twin needle. 19