Pfaff tipmatic 6112 Owner's Manual - Page 40

7I prog I t t j 0 t ke 3 3 To - prog I a G 2.5 0 G 2.51 0 • 35j011 - ]35J 0 Basting stitch (model 6232) Wth key (3) "basting" you can baste a gar ment before trying it on. When you press the toot control the machine will only make one stitch. For each further stitch you have to press the foot control each time. - Lower the bottom feed and switch off the top feed. Place the fabric under the sewing foot. - Sew one stitch, then pull the fabric the required amount to the rear. - Reooat this as many times as you need to finsh the seam. Straight stitch Program G is the basic straight stitch. The stitch length can be increased up to 6 mm as required. It is easier to do some sewing jobs by changing the needle position, e.g. topstit ching a collar or sewing in a zipper. You can select up to 1 5 different needle positions (see page 31). Please ensure that the needle is at its highest position when adjusting its setting. TIP: To prevent the fabric layers from shifting, insert dress pins crosswise to the basting position. Light fabrics are easier to baste with long straight stitches (6 mm). In this case the bottom feed need not be lowered.