Philips 10000050 User manual (English) - Page 29
Programming Machine Functions
![]() |
View all Philips 10000050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
The user can change some machine operating parameters to suit his/her personal needs. Procedure for accessing machine programming mode. PROGRAMMING MACHINE FUNCTIONS 29 and PROGRAMMING START Turn the machine off. Press the buttons together. Keeping the buttons pressed down, turn on the machine. ENGLISH WATER HARDNESS The hardness of tap water may vary depending on the region. For this reason, the appliance can be set according to the water hardness in the place where it is to be used, expressed on a scale of 1 to 4. The appliance is factory set on a hardness value of 3*. The setting should be adjusted according to the level of water hardness in the local area. Dip the strip in water for 1 second. Hardness 4 Hardness 3 Hardness 2 Hardness 1 Check how many squares change colour. Press the button to program the water hardness. Hardness 4 Hardness 3* Hardness 2 Hardness 1 If the "Aqua Prima" filter has been installed in the machine, set the machine according to these indications. The degree of hardness will be signalled by the indicator lights. Hardness 4 Hardness 3* Hardness 2 Hardness 1 If the "Aqua Prima" filter has NOT been installed, set the machine according to these indications. The degree of hardness will be signalled by the indicator lights.
![](/manual_guide/products/phillips-10000050-user-manual-english-518987f/29.png)